Welcome to Wu Xi FengHua Drying Equipment Co., Ltd.
   
Keywords: drying equipment, spray drying equipment, dryer, spray dryer, centrifugal spray granulation dryer

News

Jiangsu province Wuxi city Huishan District Yuqi Industrial Park
Contact:Mr. Ding
Mobile:+86 13606198962
Contact:Ms. Tang
Mobile:+86 13701511238
Tel:0510-83586958,83886386,83890958
Fax:0510-83586358,83586958
E-mail:fh@wuxifh.com
http://www.wuxifh.com
Company News
Position:首页 > NEWS > Company News

Drying process and advantages of pressure spray dryer

Update time:2017-03-01 22:40:44Clicks:2535
Speaking of pressure spray dryer, we may be relatively unfamiliar, on the drying process and the advantage may be a lot of people are not too clear, therefore, today we will specifically address this issue and to share with you, hope you can deepen the kn
Speaking of pressure spray dryer, we may be relatively unfamiliar, on the drying process and the advantage may be a lot of people are not too clear, therefore, today we will specifically address this issue and to share with you, hope you can deepen the knowledge and understanding of pressure spray drying machine.
First, the drying process of pressure spray dryer:
We should know that this is a main function of drying equipment, the working process, the specific process can be understood as: the internal pressure spray dryer air through the filter and heater, and then arrive at the air distributor on the top of drying chamber, the hot air will be evenly dispersed. The raw material is treated as a tiny droplet of mist, which can then be fully contacted with the hot air so as to achieve the purpose of rapid drying.
Second, the advantages of pressure spray dryer:
Pressure spray dryer advantages can be reflected in many aspects, in actual operation, it can achieve the drying efficiency is very high, especially suitable for some heat sensitive material drying, drying can be completed in a very short time, processing workload is relatively large, and the drying quality is also very good. In all the drying equipment, the advantage of evaporation in unit time is obvious.
In addition, in the entire operation process, the production process is very simple, for the user, but also can save some of the middle of the production process. If the moisture content of the liquid is between 40% and 60%, the pressure spray dryer can be dried into a powder product at a time. At the same time, can also be adjusted according to the actual situation in the drying process to control the product quality indicators.
Not only that, pressure spray dryer can also be continuous production, in modern applications can be well adapted to different work requirements. Moreover, the utility model can be combined with other processing equipment to form a continuous production line. Based on this, pressure spray dryer has a good application in many industries.
(Edit:admin)
  • Previous article:No more
  • Next article:No more
0 comments
Click release to leave a message